Skip to content
Past Opportunities

Close Date: March 10, 2023

022 – The National Institute of Standards and Technology (NIST) is seeking domestic manufacturers to produce/supply a single dual-probe micro coordinate measuring machine (CMM) ($500,000)

Opportunity

Close Date: March 10, 2023

021 – A small company in Colorado is seeking domestic manufacturers to produce/supply herbal shampoo and conditioner

Opportunity

Close Date: March 10, 2023

019 – A small company in New York is seeking a domestic manufacturer to produce/supply metal coating process for carboxymethylcellulose fiber

Opportunity

Close Date: March 10, 2023

020 – A small company in Ohio is seeking a long term domestic manufacturer to produce/supply 0.2 Micron In-line Water Filter

Opportunity

Close Date: Feb 27, 2023

018 – A small company in Iowa is seeking domestic manufacturers to produce/supply eco-friendly packaging cup and lid.

Opportunity

Close Date: Feb 27, 2023

017 – A small company in Iowa is seeking domestic manufacturers to produce/supply standard agricultural hubs.

Opportunity

Close Date: May 25, 2023

016 – A small company in Pennsylvania is seeking domestic manufacturers to produce/supply extruded copper box connector

Opportunity

Close Date: Feb 17, 2023

015 – A small company in Pennsylvania is seeking domestic manufacturers to produce/supply 80⁰ bell horn

Opportunity

Close Date: Mar 17, 2023

014 – A small company in Pennsylvania is seeking domestic manufacturers to produce/supply manual hydraulic-lift pallet jacks

Opportunity

Close Date: Feb 17, 2023

013 – A small company in Iowa is seeking domestic manufacturers to produce/supply whole egg solids free flowing

Opportunity

Close Date: Feb 08, 2023

012 – A startup company in Oregon is seeking an innovative domestic supplier that is willing to investigate and discuss new approaches to producing/supplying extruded aluminum heat exchanger with narrow gaps

Opportunity

Close Date: Feb 10, 2023

010 – The Environmental Protection Agency (EPA) is seeking domestic manufacturers to produce/supply the immediate need for a single panalytical power supply, cabling, and seal kit for spectroscopy device

Opportunity

Close Date: Feb 09, 2023

008 – The National Telecommunications and Information Administration (NTIA) is seeking domestic manufacturers of the following specialty item: Pluggable Optic Modules

Opportunity

Close Date: Feb 09, 2023

007 – The National Telecommunications and Information Administration (NTIA) is seeking domestic manufacturers of the following specialty item: Aggregation Routers

Opportunity

Close Date: Feb 10, 2023

009 – The U.S. Department of Energy (DOE) is seeking domestic small business resellers to supply 15.5-kV through 362-kV circuit breakers

Opportunity

Close Date: Jan 20, 2023

006 – The U.S. Department of Commerce’s National Oceanic and Atmospheric Administration (NOAA) is seeking domestic manufacturers for a low number purchase of the following specialty item: IAPSO Standard Seawater

Opportunity

Close Date: Jan 05, 2023

004 – The Environmental Protection Agency (EPA) is seeking domestic manufacturers to supply EV chargers in support of EPA’s Clean School Bus program: DC Fast Charger

Opportunity

Close Date: Jan 05, 2023

004 – The Environmental Protection Agency (EPA) is seeking domestic manufacturers to supply EV chargers in support of EPA’s Clean School Bus program: Level 2 EV Charger

Opportunity

Close Date: Feb 06, 2023

003 – The Environmental Protection Agency (EPA) is seeking domestic manufacturers for a single unit purchase of the following specialty item: Static dilutor and can cleaner upgrade

Opportunity

Close Date: Feb 06, 2023

002 – A small company in Florida is seeking domestic manufacturers to produce food storage container sealing rings and air valve

Opportunity

Close Date: Dec 19, 2022

149 – U.S. Department of Energy (DOE) is seeking domestic manufacturers for a single unit purchase of a 336.4 kcmil Aluminum Conductor, Steel Supported

Opportunity

Close Date: Dec 27, 2022

154 – The EPA is seeking domestic manufacturers for replacement systems to an existing EQUAN autosampler and ultimate 3000 RS and SD chromatographic pump system

Opportunity

Close Date: Jan 9, 2023

153 – The EPA is seeking domestic manufacturers for a single unit purchase ($20,000) of a water purifier

Opportunity

Close Date: Jan 2, 2023

151 – The Environmental Protection Agency (EPA) is seeking domestic manufacturers for a single unit purchase of a Centrifuge 5920R

Opportunity

Close Date: Jan 2, 2023

150 – The Environmental Protection Agency (EPA) is seeking domestic manufacturers for a single unit purchase of a Stereomicroscope

Opportunity

Close Date: Jan 9, 2023

152 – A small company in Pennsylvania is seeking domestic manufacturers to produce Nylon for hammocks

Opportunity

Close Date: Nov. 28, 2022

148 – The Environmental Protection Agency (EPA) is seeking domestic manufacturers for a single unit purchase of vision vapor pressure tester

Opportunity

Close Date: Dec. 12, 2022

147 – A small company in Colorado is seeking domestic manufacturers to produce technical fabric for sports model shoes

Opportunity

Close Date: Dec. 12, 2022

146 – A small company in Alaska is seeking domestic manufacturers to produce custom PCB manufacture and assembly

Opportunity

Close Date: Dec. 12, 2022

145 – A small company in Alaska is seeking domestic manufacturers to produce injection molding for plastic housing

Opportunity

Close Date: Jan. 9, 2023

143 – U.S. Department of Treasury’s Bureau of Engraving and Printing (BEP) is seeking domestic manufacturers for IT equipment

Opportunity

Close Date: Jan. 9, 2023

144 – U.S. Department of Treasury’s Bureau of Engraving and Printing (BEP) is seeking domestic manufacturers for various foreign manufactured spare parts

Opportunity

Close Date: Jan. 9, 2023

142 – U.S. Department of Treasury’s Bureau of Engraving and Printing (BEP) is seeking domestic manufacturers for ink and other materials

Opportunity

Close Date: Jan. 9, 2023

141 – U.S. Department of Treasury’s Bureau of Engraving and Printing (BEP) is seeking domestic manufacturers for future acquisitions planning

Opportunity

Close Date: Nov. 21, 2022

120 – A small company in Florida, referred by the International Trade Administration (ITA), is seeking domestic manufacturers to supply Poly 2-Ethyl-2-Oxazoline

Opportunity

Close Date: Nov. 21, 2022

119 – A small company in Florida, referred by the International Trade Administration (ITA), is seeking domestic manufacturers to supply Ethanol

Opportunity

Close Date: Nov. 21, 2022

118 – A small company in Florida, referred by the International Trade Administration (ITA), is seeking domestic manufacturers to supply Hydrogen Peroxide

Opportunity

Close Date: Dec. 28, 2022

140 – A small company in Colorado is seeking domestic manufacturers to produce printed Manilla folders

Opportunity

Close Date: Nov. 1, 2022

139 – U.S. Department of Commerce’s National Oceanic and Atmospheric Administration (NOAA) is seeking domestic manufacturers for a single unit purchase of IAPSO Standard Seawater

Opportunity

Close Date: Nov. 28, 2022

138 – In accordance with the CHIPS Act, encouraging the development of domestic capacity, NIST is seeking domestic manufacturers of an Automated Single Substrate Resist Develop and Chrome Etch System

Opportunity

Close Date: Nov. 28, 2022

137 – In accordance with the CHIPS Act, encouraging the development of domestic capacity, NIST is seeking domestic manufacturers of a Mechanical Clamp Based Single Wafer Deep Silicon Etcher

Opportunity

Close Date: Nov. 28, 2022

136 – In accordance with the CHIPS Act, encouraging the development of domestic capacity, NIST is seeking domestic manufacturers of ICP RIE for Etching Silicon with Hydrogen Bromide and Chlorine

Opportunity

Close Date: Nov. 28, 2022

134 – In accordance with the CHIPS Act, encouraging the development of domestic capacity, NIST is seeking domestic manufacturers of ICP Cryo REI for Silicon and Dielectric Materials

Opportunity

Close Date: Nov. 28, 2022

135 – In accordance with the CHIPS Act, encouraging the development of domestic capacity, NIST is seeking domestic manufacturers of an Electric Static Chuck Based Wafer Deep Silicon Etcher

Opportunity

Close Date: Nov. 28, 2022

133 – In accordance with the CHIPS Act, encouraging the development of domestic capacity, NIST is seeking domestic manufacturers of Reactive Ion Etcher for Silicon and Dielectrics

Opportunity

Close Date: Nov. 28, 2022

132 – In accordance with the CHIPS Act, encouraging the development of domestic capacity, NIST is seeking domestic manufacturers of a High-Resolution Mask Writer

Opportunity

Close Date: Nov. 28, 2022

131 – In accordance with the CHIPS Act, encouraging the development of domestic capacity, NIST is seeking domestic manufacturers of a High Resolution 110 KeV Electron Beam Lithography System

Opportunity

Close Date: Nov. 28, 2022

130 – In accordance with the CHIPS Act, encouraging the development of domestic capacity, NIST is seeking domestic manufacturers of a Focused Ion Beam Scanning Electron Microscope

Opportunity

Close Date: Nov. 28, 2022

129 – In accordance with the CHIPS Act, encouraging the development of domestic capacity, NIST is seeking domestic manufacturers of an X-Ray Diffractometer

Opportunity

Close Date: Nov. 28, 2022

128 – In accordance with the CHIPS Act, encouraging the development of domestic capacity, NIST is seeking domestic manufacturers of a Field Emission Scanning Electron Microscope

Opportunity

Close Date: Nov. 28, 2022

127 – In accordance with the CHIPS Act, encouraging the development of domestic capacity, NIST is seeking domestic manufacturers of a Wafer Bonder and Lithography Aligner System

Opportunity

Close Date: Nov. 28, 2022

126 – In accordance with the CHIPS Act, encouraging the development of domestic capacity, NIST is seeking domestic manufacturers of an Inductively Coupled Plasma Reactive Ion Etcher

Opportunity

Close Date: Nov. 28, 2022

125 – In accordance with the CHIPS Act, encouraging the development of domestic capacity, NIST is seeking domestic manufacturers of Semiconductor Furnaces

Opportunity

Close Date: Nov. 4, 2022

124 – U.S. Environmental Protection Agency (EPA) is seeking domestic manufacturers for a single unit purchase of the following specialty item: Miele Model PG8583 LD.

Opportunity

Close Date: Nov. 21, 2022

123 – U.S. Department of Commerce’s National Institute of Standards and Technology (NIST) is seeking domestic manufacturers to supply Atom Probe Tomography System.

Opportunity

Close Date: Nov. 21, 2022

122 – U.S. Department of Commerce’s National Institute of Standards and Technology (NIST) is seeking domestic manufacturers to supply Focused Ion Beam and Scanning Electron Microscopes.

Opportunity

Close Date: Nov. 21, 2022

121 – U.S. Department of Commerce’s National Institute of Standards and Technology (NIST) is seeking domestic manufacturers to supply Analytical Transmission Electron Microscopes.

Opportunity

Close Date: Nov. 21, 2022

117 – A small company in Florida, referred by the International Trade Administration (ITA) is seeking domestic manufacturers to supply Silver Nitrate.

Opportunity

Close Date: Nov. 21, 2022

116 – A small company in Florida, referred by the International Trade Administration (ITA) is seeking domestic manufacturers to supply TERGITOL™ L-64.

Opportunity

Close Date: Nov. 21, 2022

115 – A small company in Florida, referred by the International Trade Administration (ITA) is seeking domestic manufacturers to supply Cerium(III) nitrate hexahydrate.

Opportunity

Close Date: Nov. 17, 2022

114 – U.S. Department of Commerce’s National Institute of Standards and Technology (NIST) is seeking domestic manufacturers for a single-unit purchase of a Dicing Saw. 

Opportunity

Close Date: Nov. 17, 2022

113 – U.S. Department of Commerce’s National Institute of Standards and Technology (NIST) is seeking domestic manufacturers for a single-unit purchase of an Atomic Force Microscope

Opportunity

Close Date: Dec. 12, 2022

112 – A small company in Pennsylvania is seeking domestic manufacturers to produce a Plastic Handle for Bell.

Opportunity

Close Date: Dec. 12, 2022

111 – A small company in Pennsylvania is seeking domestic manufacturers to produce a D5 Bell.

Opportunity

Close Date: Nov. 14, 2022

109 – A small company in California is seeking domestic manufacturers to produce the following items Glass bottles

Opportunity

Close Date: Oct. 26, 2022

108 – The U.S. Environmental Protection Agency (EPA) is seeking domestic manufacturers for a single-unit purchase of an Integrated system thermogravimetric analyzer

Opportunity

Close Date: Oct. 07, 2022

099 – U.S. Environmental Protection Agency (EPA) is seeking domestic manufacturers for a 1-time purchase of a High-definition collector and gas chromatography isolink

Opportunity

Close Date: Oct. 31, 2022

104 – A small company in California is seeking domestic manufacturers to produce PVC/Vinyl mats

Opportunity

Close Date: Oct. 31, 2022

103 – A small company in California is seeking domestic manufacturers to produce polyurethane dice/beanbag balls

Opportunity

Close Date: Oct. 31, 2022

102 – A small company in California is seeking domestic manufacturers to produce 0.38mm polypropylene card materials

Opportunity

Close Date: Nov. 28, 2022

100 – A small company in Connecticut is seeking domestic manufacturers to produce razor knives with hook blades

Opportunity

Close Date: Oct. 31, 2022

101 – The U.S. Environmental Protection Agency (EPA) is seeking domestic manufacturers for the 1-time purchase of a pulse amplitude modulated (PAM) fluorometer

Opportunity

Close Date: Oct. 07, 2022

098 – The U.S. Environmental Protection Agency (EPA) is seeking domestic manufacturers for a 1-time purchase of an Ambient gas analyzers for CO and CO2

Opportunity

Close Date: Nov. 28, 2022

097 – A small company in California is seeking domestic manufacturers to produce pantiless liner fabrics

Opportunity

Close Date: Oct 7, 2022

095 – U.S. Environmental Protection Agency (EPA) is seeking domestic manufacturers to supply Vaisala CL61

Opportunity

Close Date: Oct 7, 2022

094 – U.S. Environmental Protection Agency (EPA) is seeking domestic manufacturers to supply Magee AE33 TCA08

Opportunity

Close Date: Aug. 17, 2022

085 – The Environmental Protection Agency (EPA) is seeking domestic manufacturers to supply a Elementar Vario MACRO Cube 

Opportunity

Close Date: Aug. 5, 2022

084 – The U.S. Department of Health and Human Services’ (HHS) Centers for Disease Control and Prevention (CDC) is seeking domestic manufacturers to supply Filter components 

Opportunity

Close Date: Aug. 5, 2022

083 – The U.S. Department of Health and Human Services’ (HHS) Centers for Disease Control and Prevention (CDC) is seeking domestic manufacturers to supply P100 particulate filter

Opportunity

Close Date: Aug. 5, 2022

082 – The U.S. Department of Health and Human Services’ (HHS) Centers for Disease Control and Prevention (CDC) is seeking domestic manufacturers to supply Filter parts

Opportunity

Close Date: Aug. 15, 2022

081 – A small company in Massachusetts is seeking domestic manufacturers to produce aliphatic urethane

Opportunity

Close Date: Sept 12, 2022

066 – A small company in Pennsylvania is seeking domestic manufacturers to produce corner boards

Opportunity

Close Date: Sept 12, 2022

065 – A small company in Pennsylvania is seeking domestic manufacturers to produce S-1241 strapping

Opportunity

Close Date: Sept 12, 2022

064 – A small company in Pennsylvania is seeking domestic manufacturers to produce stretch wrap

Opportunity

Close Date: Sept 12, 2022

063 – A small company in Pennsylvania is seeking domestic manufacturers to produce 5×2 machine film

Opportunity

Close Date: Sept 12, 2022

062 – A small company in Pennsylvania is seeking domestic manufacturers to produce 12oz Brite Ball

Opportunity

Close Date: Sept 12, 2022

061 – A small company in Pennsylvania is seeking domestic manufacturers to produce Pak-Techs

Opportunity

Close Date: Sept 12 2022

060 – A small company in Pennsylvania is seeking domestic manufacturers to produce 202 LOE-Ball

Opportunity

Close Date: Sept 12, 2022

059 – A small company in Pennsylvania is seeking domestic manufacturers to produce 16oz Brite cans

Opportunity

Close Date: Sept 12, 2022

080 – A small company in Colorado is seeking domestic manufacturers to produce polypropylene tray and seat covers 

Opportunity

Close Date: Aug 8, 2022

079 – A small company in Massachusetts is seeking domestic manufacturers to produce aluminum tubing

Opportunity

Close Date: Aug 8, 2022

078 – The Environmental Protection Agency (EPA) is seeking a domestic source to supply a 8.0 kVA Security Plus II Powervar uninterruptible power supply (UPS)

Opportunity

Close Date: Sept 8, 2022

054 – A small company in Pennsylvania is seeking additional responses from domestic manufacturers to produce pineapple juice concentrate NFC 12-15 brix

Opportunity

Close Date: Sept 8, 2022

053 – A small company in Pennsylvania is seeking additional responses from domestic manufacturers to produce cranberry juice concentrate 50 brix

Opportunity

Close Date: July 13, 2022

The U.S. Department of Commerce’s National Institute of Standards and Technology (NIST) is seeking domestic manufacturers to supply a Scanning Electron Microscope

Opportunity

Close Date: July 13, 2022

The Environmental Protection Agency (EPA) is seeking domestic manufacturers to supply a Sciex Triple Quad 7500

Opportunity

Close Date: July 25, 2022

075 – A small company in California is seeking domestic manufacturers to produce electronic components

Opportunity

Close Date: July 25, 2022

074 – A small company in Pennsylvania is seeking domestic manufacturers to produce tubular steel chair frames

Opportunity

Close Date: July 21, 2022

073 – A small company in Montana is seeking domestic manufacturers to produce 4/4 Katolox lumber Mexican Ebony

Opportunity

Close Date: July 21, 2022

072 – A small company in Montana is seeking domestic manufacturers to produce 8/4 Jatoba lumber Brazillian Cherry

Opportunity

Close Date: July 21, 2022

071 – A small company in Montana is seeking domestic manufacturers to produce 4/4 Bloodwood lumber

Opportunity

Close Date: July 21, 2022

070 – The U.S. Environmental Protection Agency (EPA) is seeking domestic manufacturers to supply a CERTUS flex liquid dispenser

Opportunity

Close Date: July 6, 2022

The U.S. Department of Energy (DOE) has an immediate need and is seeking domestic manufacturers to supply 48VDC Battery Banks

Opportunity

Close Date: July 7, 2022

068 – A small company in South Carolina is seeking domestic manufacturers to produce linen pillowcases.

Opportunity

Close Date: AUG 1, 2022

067 – A small company in Indiana is seeking domestic manufacturers to produce air flow control manifolds

Opportunity

Close Date: July 5, 2022

A small company in Pennsylvania is seeking domestic manufacturers to produce apple juice concentrate 70 brix

Opportunity

Close Date: June 20, 2022

A small company in Montana is seeking domestic manufacturers to produce magnetic badges

Opportunity

Close Date: June 27, 2022

A small company in Pennsylvania is seeking domestic manufacturers to produce plastic fan base and telescoping pole

Opportunity

Close Date: June 13, 2022

A small company in Iowa is seeking domestic manufacturers to produce MPC-125 polybags

Opportunity

Close Date: June 13, 2022

A small company in Iowa is seeking domestic manufacturers to produce PVDF resin

Opportunity

Close Date: June 12, 2022

A small company in Iowa is seeking domestic manufacturers to produce PFA resin

Opportunity

Close Date: June 10, 2022

A small company in Iowa is seeking domestic manufacturers to produce Lummi sticks

Opportunity

Close Date: June 10, 2022

A small company in Iowa is seeking domestic manufacturers to produce insulated boxes

Opportunity

Close Date: June 3, 2022

A small company in Indiana is seeking domestic manufacturers to produce rotary press tablets

Opportunity

Close Date: June 3, 2022

A small company in Iowa is seeking domestic manufacturers to produce electric actuators

Opportunity

Close Date: May 31, 2022

A small company in Iowa is seeking domestic manufacturers to produce steel base bands

Opportunity

Close Date: May 31, 2022

A small company in Iowa is seeking domestic manufacturers to produce Orff carts

Opportunity

Close Date: May 30, 2022

A small company in Pennsylvania is seeking domestic manufacturers to produce urea liquor formula

Opportunity

Close Date: May 19, 2022

A small company in Pennsylvania is seeking domestic manufacturers to produce glued cardboard trays

Opportunity
Back To Top
// JavaScript Document